Toa NX-100S Installation - Manual (Page 61)

4-4
Chapter 4: SYSTEM SETTINGS (SETTING USING BROWSER)
3. NETWORK SETTING
Set the NX-100/100S unit's network.
This figure represents the NX-100.
(1) IP Address
Enter the NX-100/100S unit's IP address. (Factory-preset to "192.168.1.1.")
(2) Subnet Mask
Set the mask address. (Factory-preset to "255.255.255.0.")
(3) Default Gateway
Enter the gateway address if the unit is being used outside its assigned subnet.
(Factory-preset to "0.0.0.0.")