Guiding fabric, Vmys – SINGER 2210 Athena User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Guiding Fabric

Most fabrics need only to be guided



of the presser foot. Some fabrics, however,

require support while being stitched.

« For tricot and other similar synttietic knits,

apply gentle tension by holding fabric
tight in front and back of presser foot dur*
ing sewing. DO NOT pull fabric or needle
may break!

♦ For elasticized fabric, stretch lace, and

knits with an unusual amount of elastic!'
ty, hold cis with tricot but apply firm ten­
sion in front and back of presser foot to
stretcfi the seam as the stitches are be­
ing sewn.

Pin basting and tiand basting are easy


to make temporary seams before machine
sewing. This machine also allows quick and
easy power basting UvSing the electronic corv
trot systems.

♦ Insert pins at stitching line, NEVER place

pins 01^ the underside of fabric in contact
with the feed. DO NOT sew over pins;

remove them immediately before stit­



This manual is related to the following products: