Important safeguards – SINGER 2210 Athena User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Important Safeguards
1.
Disconnect the povveriine plug from the electrical outlet when changing
needles, feet, or needle plates, or when leaving machine unattended This
eliminates the possibility of starting the machine by accidentally pressing
the speed controller.
2.
Before removing the bobbin case, disconnect the powerline plug from the
electrical outlet.
3.
Because of the up and down movement of the needle, work carefully and
watch the sewing area when operating the machine.
4.
Do not pull the fabric while stitching as this may deflect the needle, caus*
ing it to break.
5.
Before cleaning the machine, disconnect the powerline plug from the eleC'
trical outlet.
6.
Do not attempt to adjust the motor belt. Contact the nearest service center
or an authoriiied dealer should any adjustment be required.
7.
Before changing the light bulb, make sure the povveriine plug is disconnected
from the electrical outlet. Be sure to replace the face plate v/hich covers
the light bulb before operating the machine.
8.
This machine is designed to use a 15 watt maximum light bulb only.
9.
This machine Is double insulated. When servicing product, use only ideiv
tical replacement parts.
This product is suppressed for radio and television interference with the Interna'
tional Electrotechnical Commission requirements of the CISPR.