ADLINK ND-6017 - Manual (Page 18)

10 • Introduction
1.4 Overview of NuDAM-6013
What is NuDAM-6013 ?
NuDAM-6013 is a RTD input module with 3 input channels. It supports
2, 3 or 4 wires RTD input device.
Features of NuDAM-6013
• 3 RTD input channels
• 2, 3 or 4 wire RTD input support
• Programmable RTD input range
• Internal watchdog timer for device failure protection
• Easy programming by software
• Easy installation and wiring
Note (2) : for H/W version C1.2 or above and F/W version C4.6 or above.
Specifications of NuDAM-6013
— Interface
• Interface: RS-485, 2 wires
• Speed (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K ,115.2K
(115.2K only for firmware reversion above A4.00)
— RTD Input
• Input type: Pt or Ni input, 2, 3 or 4 wires
• Channels Numbers: 3
• Resolution: 16 bits
• Unit Conversion: °C or Ohm
• Temperature Range: Programmable 5 levels, ±100°C, 0~100°C,
0~200 °C, 0~600°C, 0~60 Ohms (3)
• Accuracy: ±0.1%
Note (3) : Supported on F/W version C4.5 or above.
— Power
• Power supply: +10V to +30V
• Current consumption: 0.65 W