ADLINK ND-6017 - Manual (Page 71)

Command Set • 63
3.26 Enable/Disable Linear Mapping
@Description
Enable or disable the linear mapping function for the module.
@Syntax
$(Addr)A(Status)<CR>
$ Command leading code.
(Addr) Address ID
A Reference to control the linear mapping function.
(Status) One char to determine the linear mapping function
enable or disable.
1: means enable.
0: means disable.
@Response
!(Addr)<CR>
or
?(Addr)<CR>
! Command is invalid.
(Addr) Address ID.
? Command is invalid.
@Example
User command: $03A1<CR>
Response: !03<CR>
This command set the linear mapping function of ND-6014D is enable,
and the address of this module is 03H.
(6014D)