ADLINK ND-6017 - Manual (Page 81)

Command Set • 73
3.35 Set High Alarm
@Description
Set high alarm limit value at specified analog input module.
@Syntax
@(Addr)HI(Data)<CR>
@ Command leading code.
(Addr) Address ID
HI Set high alarm limit value.
(Data) Alarm high limit value.
Data format is engineering units. (an + or - sign with
five decimal digits and a decimal fixed point.
@Response
!(Addr)<CR>
! Command is valid.
(Addr) Address ID.
@Example
User command: @06HI+300.00<CR>
Response: !06<CR>
Set high alarm limit value to 300
°C for type J thermocouple to input at
address 06H.
(6011/D, 6012/D, 6014D)