ADLINK ND-6017 - Manual (Page 95)

Data Format and Input Range • 87
Input Range Resolution
±15 mV, ±50 mV 1 µV three decimal places
±100 mV, ±150 mV, ±500 mV 10 µV two decimal places
±1 V, ±2.50 V, ±5 V 100 µV four decimal places
±10 V 1mV three decimal places
±20 mA 1 µA three decimal places
Type J and T thermocouple, RTD 0.01 °C two decimal places
Type K, E, R, S, B, N and C
thermocouple
0.1 °C one decimal places
Table 4-1 Data format and resolution
Example 1:
• Input Range is ±5 V
• Input is -1.37 Volts
engineering units: -1.3700<CR>
Example 2:
• Input Range is ±10 V
• Input is +3.653 Volts
engineering units: +03.653<CR>
Example 3:
• Input Range is Type K thermocouple (range 0 °C to 1000°C)
• Input is 406.5 °C
engineering units: +0406.5<CR>
Example 4:
• Input Range is Type T thermocouple (range -100 °C to 400°C)
• Input is -50.5 °C
engineering units:
-
050.50<CR>
Percent of FSR (Full Scale Range)
• Data format bit 1 and 0 set to 01 is percent of FSR
• This data format including three components
1. sign (+ or - )
2. digits
3. decimal point