ADLINK ND-6017 - Manual (Page 93)

Command Set • 85
3.44 Host is OK
@Description
When host watchdog timer is enable, host computer must send this
command to every module before timeout otherwise “host watchdog
timer enable” module‘s output value will go to safety state output
value.
Timeout value and safety state output value is defined in 3.30. “Set Host
Watchdog Timer & Safety Value”
@Syntax
~**<CR
>
~ Command leading code.
** Host is OK.
@Response
Note: Host is OK command has NO response.
@Example
User command: ~**<CR>
(6011/D, 6012/D, 6013
6014D, 6017, 6018)