Vortech 2005-2010 Ford 4.6L 3v Mustang GT - Manual (Page 30)

P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
8
4.1 POWER STEERING RELOCATION (2010 Models Only)
A. Locate the power steering assembly 4FU110-010.
B. Attach the power steering (P/S) relocation bracket
P/N 4FU010-101 (R) with the hardware provided
to the P/S reservoir removed in an earlier section.
C. Locate the factory 3/4" PS hose and cut off the
90º bend as shown. See fig 4.1a.
D. Using a 3/4" brass union and two stepless
clamps, attach the 90º bend to a length of sup-
plied 3/4" hose as shown. See fig 4.1b.
E. Attach 90º 3/4" and a length of supplied 3/8” hose
to reservoir using the factory clamps. Remove the
inboard 13mm headed strut mount nuts and install
PS reservoir assembly in location shown. See fig
4.1c.
F. Route hoses towards front of vehicle away from
exhaust and moving objects.
G. Connect previously installed PS hoses from reser-
voir to the factory PS hoses using the appropriate
brass unions and hose clamps. See fig 4.1d.
Fig. 4.1a
Fig. 4.1b
Fig. 4.1d Fig. 4.1c