Vortech 2005-2010 Ford 4.6L 3v Mustang GT - Manual (Page 54)

P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
32
BENT
A/C LINE
8. CHARGE AIR COOLER INSTALLATION (CHARGE COOLED KITS ONLY) , cont’d
GROUND
STRAP
21. On the passenger’s side of the engine,
attached to the valve cover, is a large wire
harness. The harness will have to be relocat-
ed to gain clearance for the surge tank and
the radiator overflow reservoir. (See Figs.
8B-n, 8B-m.)
22. Detach the wiring harness from the retaining
clips and move the harness to the shock
tower. Secure the harness to the A/C line with
wire ties. (See Fig.
8B-n.)
23. Remove the small clip retaining the small wir-
ing harness to the shock tower. (See Fig.
8B-n.)
24. Attach the small harness to the large harness
with wire ties.
25. To gain clearance for the coolant reservoir,
the A/C line will need to be bent slightly
towards the passenger’s side fender. (See
Fig. 8B-n.)
NOTE: A/C line is under high pres-
sure. Use caution not to kink
or damage the line.
(2005-2006 Only)
26. Remove the 10mm headed screw retaining
the ground strap to the bracket on the strut
tower. (See Fig. 8B-o.)
Fig. 8B-m
Fig. 8B-n
Fig. 8B-o
2005-2006
LOCATION
ONLY
B. WATER COOLER ASSEMBLY INSTALLATION, cont’d
SECURE
HARNESS
WITH WIRE-TIES