Vortech 2005-2010 Ford 4.6L 3v Mustang GT - Manual (Page 58)

P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
36
8. CHARGE AIR COOLER INSTALLATION (
CHARGE COOLED KITS ONLY
), cont’d
Fig. 8C-i
Fig. 8C-h
Fig. 8C-j
TRIM FAN SHROUD AS NEEDED
FOR HOSE CLEARANCE
9. Modify the small hose removed from the fac-
tory coolant overflow reservoir. By cutting the
"S” bend off the hose end. (See Fig. 8C-h.)
10. Install a 3/8" union and a #17 stepless clamp.
Secure the clamp. Using a length of 3/8"
(approximately 40" long) hose that is provid-
ed, secure the hose to the union with a #17
stepless clamp. (See Fig.
8C-i.)
11. Route the overflow hose across the radiator
and under the radiator retaining bracket to the
1/4"NPT x 3/8" hose barb fitting in the coolant
reservoir securing with a clamp. (See Fig.
8C-j.)
C. ENGINE COOLANT RESERVOIR
INSTALLATION (2005-2006 Models Only),
cont’d