Vortech 2005-2010 Ford 4.6L 3v Mustang GT - Manual (Page 56)

P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
34
8. CHARGE AIR COOLER INSTALLATION (CHARGE COOLED KITS ONLY)
Fig. 8C-a
1. Locate assembly 8N155-080.
2. Attach the rear reservoir mounting bracket
4FU010-051 to the reservoir with the 1/4-20 x
1/2" long bolts and washers provided. (See
Fig. 8C-a.)
3. Attach bracket 4FU010-061 to the front of the
reservoir with the hardware provided. (See
Fig. 8C-b.)
4. Locate and install 1/4"NPT x 3/8" barbed fit-
ting in the tapped hole just above the previ-
ously installed mounting bracket. This hole
may have to be opened using the appropriate
drill bit. (See Fig. 8C-c.)
C. ENGINE COOLANT RESERVOIR INSTALLATION (2005-2006 Models Only)
Fig. 8C-b
Fig. 8C-c
NOTE: For 2007-2010 models skip to
Section 8.E.