Air discharge assembly (non-cooled kits only) – Vortech 2005-2010 Ford 4.6L 3v Mustang GT User Manual
Page 69
Advertising
P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
47
A.
Attach the 4.5" sleeve to the discharge duct with
the #72 clamps provided.
B.
Install the 3.0" x 2.75" reducer to the inlet of the
discharge duct and secure the #48 hose clamp
provided.
C.
Install the duct to the inlet of the throttle body and
the outlet of the supercharger Secure the remain-
ing #72, and #44 hose clamps provided. (See
Fig. 9-a.)
9. AIR DISCHARGE ASSEMBLY (Non-cooled kits only)
Fig. 9-a
Advertising