Vortech 2005-2010 Ford 4.6L 3v Mustang GT - Manual (Page 49)

P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
27
8. CHARGE AIR COOLER INSTALLATION (CHARGE COOLED KITS ONLY) , cont’d
NOTE: When installing the cooler, make
sure that the water ports are
configured as shown in Figs.
8B-a, 8B-q. The “top cooler port”
must be the highest point on the
cooler for proper air purging.
B. WATER COOLER ASSEMBLY
INSTALLATION, cont’d
7. Attach the previously assembled water cooler
to the bolts and spacers and secure with the
8mm nuts and washers provided. Tighten all
cooler hardware at this time. (See Fig. 8B-e.)
8. Attach the supplied short 90° hose (7U030-
065) to the top port on the CAC cooler as
shown. (See Fig. 8B-f.)
9. Install one of the supplied 3/4" hose unions
into the open end of the previously installed
90° hose and secure. (See Figs. 8B-f, 8B-q.)
Fig. 8B-e
Fig. 8B-f
3/4" HOSE
UNION
SHORT 90°
ELBOW