Air inlet assembly – Vortech 2005-2010 Ford 4.6L 3v Mustang GT User Manual
Page 73
P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
51
A.
Locate assembly 4FU112-010.
B.
Remove two of the 3/8-16 x 1" bolts securing the
supercharger in place. Install the air inlet support
bracket and secure with the 3/8" bolts removed
from the supercharger mounting plate. (See Fig.
13-a.)
C.
Install the 3/4"NPT x 1" x 90° plastic fitting to the
air inlet duct. (See Fig. 13-b.)
D.
Install the 1/4"NPT x 3/8" hose barb fitting in the
location noted. (See Fig. 13-c.)
D.2 (V-Power/Bullitt Kits Only) Drill out the second
3/4" NPT location on the air inlet duct using cau-
tion not to damage the threads and install the sec-
ond 3/4" NPT x 1 x 90° plastic fitting to the air
inlet duct. Orient both fittings as shown in Fig
13-d2.
E.
Attach the 4.0" x 3.5" reducer sleeve to the inlet
duct. Secure the sleeves with the clamps provid-
ed. (See Fig. 13-d.)
Fig. 13-a
Fig. 13-d
Fig. 13-c
Fig. 13-b
3/4"NPT x 1" x 90°
BARBED FITTING
1/4"NPT x 3/8" x 90°
HOSE BARBED
FITTING
13. AIR INLET ASSEMBLY
Fig. 13-d2 (V-Power/Bullitt Kits Only)