Vortech 2005-2010 Ford 4.6L 3v Mustang GT - Manual (Page 50)

P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
28
8. CHARGE AIR COOLER INSTALLATION (CHARGE COOLED KITS ONLY) , cont’d
10. 2005-2009 models: Locate assembly 8N104-
125. Confirm that the assembly is complete.
2010 Models: use assembly 8N104-127.
11. Attach the provided ring terminal to the ground
wire on the suplied water pump plug harness.
Connect the supplied length of 16GA wire to
the positive wire using the supplied butt con-
nector. Connect the water pump harness to
the water pump.
12. Locate the supplied water pump (8F001-403),
two 2-3/8" adel clamps, and water pump
mounting bracket. Place the adel clamps on
the water pump. Using the supplied 1/4-20
hardware, secure the water pump and clamps
to the mounting bracket. When installing,
attach the water pump ground wire to one of
the water pump mounting clamps using the
previously installed ring terminal. (See Fig.
8B-g.)
2010 Models: use water pump bracket depict-
ed in Fig. 8B-g2.
13. Attach the pump assembly to the two 8mm x
35mm long bolts previously installed and
secure using the 8mm nuts and washers pro-
vided. (See Fig. 8B-h.)
2010 Models: see Fig. 8B-h2
Fig. 8B-g
Fig. 8B-h (2005-2009 Models)
MOUNTING
BRACKET
ADEL
CLAMP
PLUG
HARNESS
WATER
PUMP
HOSE TO
PASSENGER’S
SIDE SHOCK
TOWER
B. WATER COOLER ASSEMBLY
INSTALLATION, cont’d
8mm
HARDWARE
Fig. 8B-g2 (2010 Models)
Fig. 8B-h2 (2010 Models)