Vortech 2005-2010 Ford 4.6L 3v Mustang GT - Manual (Page 72)

P/N: 4FU020-010 v6.2, 06-08-10
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Corp. Secured
50
Fig. 12-a
Fig. 12-c
12. CRANK CASE BREATHER AND PCV INSTALLATION
A. Locate PVC/MAF assembly 4FU139-096.
B. Install the hose assembly between the driver’s
side valve cover and the intake manifold. Secure
hose connections as necessary using the supplied
stepless clamps.
(See Figs. 12-a, 12-b for assistance.)
C. Locate the factory 3/8" x 90° fitting removed from
the passenger’s side valve cover in a previous
step.
D. Connect the remainder of the supplied 3/8"ID
hose to the 90° fitting and connect to the passen-
ger’s side valve cover. (See Fig. 12-c.)
E. Route the open end of the 3/8" hose behind the
alternator and across to where the air inlet duct
will be located.
FACTORY 90° HOSE
CONNECTOR
CONNECTION ON
PASSENGER’S SIDE
Fig. 12-b
FACTORY 90° HOSE
CONNECTOR
SUPPLIED PCV
VALVE
3/8" TO 5/8"
UNION