CIRCUTOR AFQ Series - Manual (Page 10)

AFQ-4W
10 Instruction Manual
There might be an offset in the centre of gravity from the centre of
the cabinet, as a result of the uneven distribution of loads in
equipment. The necessary precautions must be taken to prevent the
equipment from tipping over during abrupt operations.
Figure 3: Unloading with a forklift
1.3.- STORAGE
The unit should be stored according to the following recommendations:
• Avoid placing it on uneven surfaces.
• Do not store in outdoor areas, humid areas or areas exposed to the
splashing of water.
• Avoid hot spots (maximum environmental temperature: 45ºC)
• Avoid saline and corrosive environments.
• Avoid storing the unit in areas where a lot of dust is generated or where
the risk of contamination by chemical agents or other types of pollution is
present.
• Do not place any weight on top of the unit's cabinets.