CIRCUTOR AFQ Series - Manual (Page 69)

AFQ-4W
Instruction Manual 69
2.- Wait 5 minutes for the energy accumulated in the capacitors to discharge.
3.- Remove the protection board from the inductor compartment.
( Figure 70 )
Figure 70: Remove the protection board from the inductor compartment.
4.- Take off the inductor busbars and cables. ( Figure 71 )
 Use a 10 mm socket spanner and 5 mm Allen key to take off the cables
from the inductors' side.
 Use a 13 mm socket spanner and 13 mm open-end spanner to
disconnect the cable from the mains side.
Figure 71: Take off the inductor busbars and cables.