d&b T-Series - Manual (Page 12)

T-SUB
- Release the Locking pin and slide out the Rear link up to its stop
position.
- Insert the Locking pin to fix the Rear link in place.
Preset splay angles on T10 cabinets
The splay angles between T10 cabinets can be set in the range from 0°
to 15° in 1° steps.
The splay angles are set at the central rear rigging strands of the T10
cabinets.
Interconnecting the cabinets
Both the T10 and T-SUB cabinets are interconnected with their Front
links on both sides of the cabinet's front and with the Splay/Rear links
on the center rigging strand at the cabinet's rear.
Front links
Once the Front links are fit into the respective track of the next cabinet,
the cabinets are interconnected by inserting the Locking pins to both
sides of the cabinet.
T-Series Rigging manual (1.1 EN) Page 12 of 44