d&b T-Series - Manual (Page 21)

4. Add further T10 cabinets
- Preselect the desired splay angle on the upper cabinet.
- Slide and fold out the Front and Splay links of the next cabinet.
- On the rear hook the Splay link of the next cabinet over the preset
Locking pin of the upper cabinet.
- Lower the cabinet to enable the second Locking pin to be inserted.
- Insert the second Locking pin (safety pin) to secure the Splay link of
the cabinet.
- Release the Locking pins at the front of the upper T10 cabinet.
- Raise the bottom cabinet.
- Align the cabinets so as to enable the Locking pins to be inserted
through the Front links of the bottom cabinet.
- Insert and lock the Locking pins on both sides.
- To add further cabinets proceed in the same manner until the
assembly is completed.
T-Series Rigging manual (1.1 EN) Page 21 of 44