d&b T-Series - Manual (Page 14)

3. Preparing the setup
3.1. General
Check the acoustical and mechanical setup using the ArrayCalc array
calculator and prepare enough printouts for each array.
The plan enables the riggers to set up the suspension points, the
securing points and the chain hoists.
When on site first:
- clear the working areas,
- check that the hoists are exactly in the specified position,
- the chains are not twisted,
- there is enough space to set up and lift the array.
3.2. Inspections
Before setup carry out a visual inspection of all system components for
faults. This also includes the loudspeaker and in particular the rigging
parts of the cabinets (Front and Splay links).
Damaged components must be withdrawn from use immediately. Please
follow the instructions in section 7. Care and maintenance / Disposal on
page 41 of this manual.
T-Series Rigging manual (1.1 EN) Page 14 of 44