KLING & FREITAG K&F CD Remote - Manual (Page 27)

User's manual K&F CD 44 Remote
KLING & FREITAG GMBH © 2014 Version 5.5 Page 27 of 50
Tip
You can load a 'Complete Backup' of a CD 44 without extended memory into a one with
extended memory. All not used memory will be overrided by dummy data. To save data the
oppsite direction is not possible.
Tip
Important information for users of SEQUENZA 10 N/W
Only applies when updating the CD 44 Remote Software from a version lower than 1.3 to a
version 1.3 or higher!
After loading a complete backup, the controllers still do not contain the current SEQUENZA
10 N/W Speakers (LS Blocks), which provide the full ease of use. With the current ones the
SEQ LShelv Filter will be adjusted just by clicking the number of used loudspeakers. See
Chapter Parametric Filters on page 32.
To get this feature working you have to update the SEQUENZA Speakers (LS Blocks).
An update for enhancing the ease of use is necessary only if the revision of the SEQ Speakers
(LSBlocks) is lower than 1.4.
You will find the revision number of your Speakers (LSBlocks) in the device Window in the
[Rev] column.
Without updating your SEQUENZA Speakers, you have to adjust the SEQ LShelv Filters for the
SEQUENZA 10 N/W manually. See the corresponding table in chapter [Parametric Filters 'PEQ'
+ SEQ LShelv (Filter A Taste)] in the controllers' hardware manual.