4 event configuration – Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch User Manual
Page 78
![background image](/files/770400/content/doc078.png)
14 RMON
73
value is less than or equal to this threshold, and the last sample value was greater
than this threshold, a single event will be generated. A single event will also be
generated if the first sample, after this entry becomes valid, is less than or equal to
this threshold and the associated StartupAlarm is equal to fallingAlarm (2) or
risingOrFallingAlarm (3). After a falling event is generated, another such event will
not be generated until the sampled value rises above this threshold and reaches the
Rising Threshold.
Falling Event Index: The index of the eventEntry is used when a falling threshold is
crossed. The eventEntry identified by a particular value of this index is the same as
identified by the same value of the event Index object.
Step 6 Select Startup Alarm: rising alarm, falling alarm and rising or falling alarm.
Startup Alarm: The alarm that is sent when this entry is set to be valid for the first
time. If the first sample, after this entry becomes valid, is greater than or equal to the
Rising Threshold and alarm Startup Alarm is equal to rising Alarm (1) or rising Or
Falling Alarm (3), then a single rising alarm will be generated. If the first sample,
after this entry becomes valid, is less than or equal to the Falling Threshold and alarm
Startup Alarm is equal to fallingAlarm (2) or risingOrFallingAlarm (3), then a single
falling alarm will be generated.
Step 7 Set the Sample Interval over which the data is sampled and compared with the rising
and falling thresholds (in seconds).
Step 8 Configure the Owner that configures this entry and is therefore using the resources
assigned to it.
Step 9 Click <Create>, the lower part of the interface will show the RMON Alarm Entries.
14.4 Event Configuration