2 snmp user – Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch User Manual
Page 70
![background image](/files/770400/content/doc070.png)
13 SNMP Manager
65
3.1.2 SNMP User
The User can manage the device via the management station software. You can configure the
SNMP User on this page.
User Name: Type the User Name here. It is a string of 3 to 16 characters.
Privilege: Select the privilege to be RO or RW.
SNMP V3 Encryption: Click to enable SNMP V3 Encryption. If SNMP V3 Encryption is not
selected, neither encryption nor authentication will be performed.
Auth Algorithm: Select the Authentication Algorithm for the SNMP v3 User.
MD5: The authentication is performed via HMAC-MD5 algorithm.
SHA: The authentication is performed via SHA (Secure Hash Algorithm). This authentication
mode has a higher security than MD5 mode.
Auth Password: Type the password for authentication. It is a string of 9 to 15 characters in
plain text, or a 32-bit hexadecimal number in cipher text if MD5 algorithm is used, or a 40-bit
hexadecimal number in cipher text if SHA algorithm is used.
Privacy Algorithm: Select the Privacy Algorithm for the SNMP v3 User.
Disable: No privacy method is used.
DES: DES encryption method is used.
AES: AES encryption method is used.
Privacy Password Type the privacy password. It is a string of 9 to 15 characters in plain text,
or a 32-bit hexadecimal number in cipher text if MD5 algorithm is used, or a 40-bit hexadecimal
number in cipher text if SHA algorithm is used.
The user list is displayed at the bottom, the users can be deleted.