2 route port, 3 misc – Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch User Manual
Page 39
7 Forwarding
34
7.3.2 Route Port
On this page, you can configure a port in a specified VLAN group as a static router port. By
default, a port is not a static router port.
If a port is fixed to receive the packets from a multicast group, it can be configured to join in
the multicast group statically, so that the device can receive IGMP message by the port from
router.
Route port: The port directly connected to multicast devices, which is the IGMP Querier.
The lower part of this page lists static router ports of all VLANs.
Caution: the router port should be within the VLAN. Please refer to
5 VLAN
.
7.3.3 Misc
This tab page sets the following IGMP Snooping Misc configuration parameters:
Host Timeout:The switch starts for a port after the port joins a multicast group. After it time
out, the port will be deleted from the group. It is in the range of 200 to 1000; by default, the
value is 260 seconds.
Route Timeout: The switch starts Router Timeout for each router port when it time out, it will