Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch - Manual (Page 23)

5 VLAN
18
802.1Q VLAN.
5.2 Port-based VLAN
Port-based VLAN technology introduces the simplest way to classify VLANs. You can isolate
the hosts and divide them into different virtual workgroups through assigning the ports on the
device connecting to hosts to different VLANs.
This way is easy to implement and manage and it is applicable to hosts with relatively fixed
positions.
 Note:
Select Port-based VLAN from the VLAN Mode in 5.1 Advanced page , so that you can
enter the Port-based VLAN configuration page.
O n its page, the user can create a new VLAN group with specific VID and VLAN group name.
Up to 255 VLAN groups can be created; each VLAN group can have an ID number from 1 to
255.
Configuration Example:
As in the following figure, a VLAN is configured, whose VID is 1 and name is VLAN0001 by
default, and the member ports are Ethernet 0/6 and the T2 aggregation group. It means that
the devices connecting with Ethernet 0/6 and T2 can communicate with each other, but they
cannot communicate with other VLAN.
The configured VLAN can be modified or deleted. The lower part of this page lists all
port-based VLAN groups configured; they can be modified or deleted.