2 snmp trap, 1 global trap, 2 trap host ip – Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch User Manual
Page 71: 3 trap port
Advertising
13 SNMP Manager
66
13.2 SNMP Trap
Agent use SNMP Trap to send traps to NMS.
13.2.1 Global Trap
On this page, you can enable or disable Trap globally.
13.2.2 Trap Host IP
This tab page specifies SNMP trap Host IP. Host IP is the IPv4 address of the host to receive
the traps.
The bottom part of this page lists all existing trap host IP addresses. They can be deleted.
13.2.3 Trap Port
Enable or disable the trap function for each port. The trap information refers to linkup or
link-down.
The bottom part of this page lists the trap status of all ports.
Advertising
This manual is related to the following products: