Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch - Manual (Page 6)

1 Preface
1
1 Preface
This manual applies to the Signamax 065-7909HPOE industrial switch.
1.1 Conventions
1.2 Device Introduction
1.2.1 Brief Introduction
Signamax Industrial Ethernet POE Series Switches are designed to meet various industrial
application needs and provide customer with a high-end industrial Ethernet network
communication solution. The Signamax 065-7909HPOE’s high availability and reliability, as
well as the rich security features, make it ideal for secure data transmission. The Signamax
065-7909HPOE provides powerful management capabilities, and can be managed through a
Web Browser, CLI, Telnet/serial console, and SNMP. The Signamax 065-7909HPOE switch
provides IEEE 802.3af-standard PoE Power Source Equipment (PSE) power for Powered
Devices (PDs) electrical equipment such as IP telephones, wireless LAN access points
(APs), network cameras etc. It is designed to utilize dual power supplies for redundancy, with
wide DC input range and support DIN rail and wall mounting for installation in industrial
environments.
“RecoverRing II™” is a proprietary technology of Signamax, Inc. It is designed especially for
industrial applications, providing fast Ethernet ring protection and recovery within 20ms. From
the management interface, users can choose either ports from normal Ethernet ports or trunk
ports to form an Ethernet ring for faster recovery and wider bandwidth, to keep industrial
applications running continuously.
GUI Convention Description
Boldface Keywords on web management page are in Boldface
Italic Tab page names are in italic
<> Buttons are in <>
[ ] Menus and submenus are in [ ].
 Note This icon is added to the notes.
Caution
Means reader be careful. Improper operation may cause data loss or
damage to equipment.