2 backup configuration, 3 restore configuration, 10 reboot – Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch User Manual
Page 86
![background image](/files/770400/content/doc086.png)
15 Administration
81
15.9.2 Backup Configuration
This page sets a TFTP Server IP and File Name. Before backing up configuration, make
sure the switch is connected to the TFTP server. The switch configuration file will be uploaded
to TFTP server with the specified File Name after <Apply> button is clicked.
15.9.3 Restore Configuration
This page sets a TFTP Server IP and File Name. Before restoring a configuration, make sure
the switch is connected to the TFTP server. The switch will download the file with the
specified File Name and use it as the configuration file after <Apply> button is clicked.
Caution:
During updating firmware, uploading or downloading a configuration file, make sure the
power is on.
15.10
On this page, there are two buttons: <Save And Reboot> and <Reboot Without Save>.
Save And Reboot
Saves the current configuration and then reboot
Reboot Without Save
Directly reboots without saving the current configuration. All
changes may be lost.