Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch - Manual (Page 81)

15 Administration
76
15.4 SMTP
This page sets SMTP configuration. When a pre-defined event occurs, an e-mail will be sent
to the following destination mail address.
Destination Mail: The e-mail address to receive the event information.
SMTP Service IP: The IP address of SMTP server.
Source Account Name: Source e-mail account on SMTP server.
SMTP Password: The password for source e-mail account.
Click <Test> to check whether the configuration is correct. If it is correct, the destination mail
will receive an e-mail.
15.5 E-mail Alarm
This page sets the events that will trigger an e-mail described in Section 15.4 SMTP ,
including system events and port events.
15.5.1 System Event
This page sets system event alarm configuration, including Power A Failure, Power B
Failure and RecoverRing II™ Broken.
This page sets the following system events. Select <Apply> for an event to trigger e-mail
sending when this event occurs.