5 poe – Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch User Manual
Page 20
4 Port Management
15
4.5 POE
POE (Power Over Ethernet) is referred to as a technology by which
the existing Ethernet cabling infrastructure (Cat.5 or better twisted-pair copper cabling) which,
without any changes, transmits data signals for some IP-based terminals
(such as IP telephones, wireless LAN access points (APs), network cameras etc.), while pro-
viding a 48 V DC power supply technology for such equipment.
This page has three tabs to configure various parameters POE：
4.5.1
POE configuration
Power management mode ：Allocation, Class. Allocation mode can be directly assigned to
the PD power; Class mode will be based on the PD class to assign power required, PD is
classified as shown in the following table.
PD classification
power range
0（default）
0.44 to12.95
1
0.44 to3.84
2
3.84to6.49
3
6.49to12.95
4
Retained for future use
Max Power: Set the POE power supply output for the maximum value of total power; the range
is 0 to 720 W.