Signamax Managed Hardened PoE Industrial DIN-rail Mount Switch - Manual (Page 29)

5 VLAN
24
(namely VLAN 1) in this mode even if you configure the port to permit the packets of all
the VLANs.
Configuration Steps:
Step 1 Select a specific port for setting;
Step 2 Enable or disable the GVRP function on the port;
Step 3 Select the Registration Type for the selected port.
The lower part lists the GVRP attribute of all ports.
Caution:
 If a port is configured in RecoverRing II™, it cannot be enabled GVRP ;
 The port to configure GVRP must be a trunk port.