1 power-on after blade insertion, Figure 11-1, Blade power-on after insertion – Artesyn Centellis 2000 Shelf - DC Installation and Use (June 2014) User Manual
Page 154
Advertising
Software
Centellis 2000 Shelf - DC Installation and Use (6806800G45F)
154
11.3.1 Power-On After Blade Insertion
The default for each slot is that when a blade is inserted it is automatically switched on by the
shelf manager. To change this, you need to change the shelf FRU information via the HPI FRU
activation control. The default for the Auto Insert Timer in HPI is 60 s.
Figure 11-1 Blade Power-On After Insertion
Advertising