Artesyn Centellis 2000 Shelf - DC Installation and Use (June 2014) - Manual (Page 47)

System Overview
Centellis 2000 Shelf - DC Installation and Use (6806800G45F) 47
1.1.2 Backplane
The backplane is fully compliant with the PICMG 3.0 R3.0 Specification and it has been designed
with the following features:
 Two node slots
 Fabric interface connecting the node slots to each other and to the user card slots
 Base interface with dual star interconnect
 Base interface to the shelf manager slots
 Update interface between the node slots
 Bused IPMB-0 connections
 Synchronization clock buses
1.1.3 Shelf Manager and Hub Board
The shelf manager & hub board ATCA-MF105 is designed to be used in a Centellis 2000 system.
The shelf manager is the central management unit of the shelf. Its purpose is to monitor,
control and assure proper operation of the shelf and all other components of the AdvancedTCA
system and to communicate with the system manager.
It reports anomalies and errors and takes corrective actions if required (for example, increase
the speed of the fans). Alarm states are displayed via the LEDs of the shelf’s alarm panel.
The ATCA-MF105 has access to detailed inventory information as well as sensor status
information of the shelf and components of the shelf.
The ATCA-MF105 is fully compliant to the shelf management functions as specified in the
PICMG 3.0 R3.0 Specification.
For a detailed description refer to the ATCA-MF105 Installation and Use and the System
Management Interface Based on HPI-B (Centellis CO 31kX/4100/2000) User’s Guide.