Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 109)

Basic Input Output System
PrAMC-7311 Installation and Use (6806800P34D) 109
6.10 Boot Menu
This section describes how to select, order, and change priority of a device’s boot order.
On power-up, BIOS attempts to load the operating system from the specified boot device.
When the operating system is not found on the specified boot device, BIOS attempts to load it
from other given devices in their assigned order. This order should be specified in the Boot
Menu.
Boot devices that may contain the operating system include:
 Hard drives
 CD ROMs
 Removable devices such as floppy drive
 PXE boot
When specifying any device as a boot device, ensure the operating system is available on the
device. The BIOS uses Setup to determine a device from which to boot the operating system.
To Determine the Order of a Boot Device
Follow these steps to specify the order of boot devices.
1. Select [Boot] from the Main Menu.
The Boot Device Priority options are displayed in Figure 6-34 .
Set User Password
User Hint String
Min. password
Authentication
HDD Security Status
No HDD detected
Trusted Platform Module (TPM)
Table 6-31 Security Menu (continued)
Feature Options Description