Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 27)

Chapter 1
PrAMC-7311 Installation and Use (6806800P34D) 27
Introduction
1.1 Features
The PrAMC-7311 is designed as a hot-swappable, high-performance and low-power dual-core
processor AMC module and can be used as a processing and system controller module as
defined in the Micro Telecom Computing Architecture (μTCA) standard. The module works in
conjunction with an AMC carrier card and extends the processing power and functionalities of
the carrier card. It is based on the Intel Core i7-2655LE processor and the Intel QM67 chipset
and offers powerful processing capability with low power consumption, large memory
capacity, USB2.0 port Connected SD card, and high I/O bandwidth via face plate and rear AMC
fabric I/O interfaces.
It is available as a mid-size AMC module.
Table 1-1 Features
Feature Description
Processor Intel Core i7-2655LE LV processor (4 MB L3 cache) 2.2 GHz
Memory Support for dual channel DDR3-1333 registered memory and for 2 Gbit
/ 4 Gbit SDRAMs for 4 GB / 8 GB capacity, 4Gbit dual -die SDRAMS for 16GB
capacity
Quad Gigabit Ethernet
(SerDes) Intel i350-AM4 (PCIe x 4) Dual 1 Gbit SerDes interface via AMC fabric I/O
interface, Supports PXE boot
1 Gbit Fast Ethernet Intel i350-AM4 (PCIe x4)
Face plate RJ-45 port
Supports PXE boot
USB 2.0 Based SD card Optional 2GB MicroSD card
PCIe Interface One PCIe x8 interface
Configurable as two PCIe x4 interfaces
Supported via AMC fabric I/O interface
SATA Interface Two Gen 2 SATA channels via AMC fabric I/O interface
RS-232 Port Face plate RJ-45 port
Core Chip Intel BD82QM67 Platform Controller Hub (PCH)
MMC Renesas H8S/2472 microcontroller
Implementing Pigeon Point MMC firmware
Form Factor Single width mid-size AMC (73.5 mm x 181.5 mm)