Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 62)

Basic Input Output System
PrAMC-7311 Installation and Use (6806800P34D) 62
6.2 Connecting to a Console
The PrAMC-7311 lets you monitor system conditions through the serial port connector on the
face plate. This is a standard Low Profile RJ45 connector.
Configure your console or terminal emulation software using the parameters shown in Table
6-1 . The default BIOS serial port settings are described below. Flow Control may be enabled if
required. The PrAMC-7311 serial port supports a full-modem configuration.
Table 6-1 Serial Port Configuration Parameters
Parameter Settings
Baud Rate 115200
Data Bits 8
Parity None
Stop Bit 1
Flow Control None
RPB Terminal Type ANSI
Various terminal settings will affect how the F2 key is interpreted.
Key EFI Scan Code EFI 1.10 PC ANSI VT100+ VTUTF8 VT100
F2 0x0C ESC [ N ESC 2 ESC O Q