Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 116)

Basic Input Output System
PrAMC-7311 Installation and Use (6806800P34D) 116
System cache error - Cache
disabled RAM cache failed BIOS test. BIOS disabled
cache Contact your local sales
representative or services for
further support.
System CMOS checksum bad -
run SETUP System NVRAM (CMOS) has been
corrupted or modified incorrectly,
perhaps by an application program that
changes data stored in NVRAM (CMOS). Run setup and reconfigure
system either by getting
default values and/or making
your own selections.
System RAM Failed at offset:
nnnn System RAM failed at offset nnnn in the
64k block at which the error was
detected. Contact your local sales
representative or services for
further support.
nnnn System RAM Passed nnnn is amount of system RAM in KBs
successfully tested None
System timer error Timer test failed Requires repair of system
blade
UMB upper limit segment
address: nnnn Address nnnn of the upper limit of upper
memory blocks indicates released
segments of BIOS which may be
reclaimed by a virtual memory manager None
Video BIOS shadowed Video BIOS successfully copied to shadow
RAM None
Invalid System Configuration
Data - run configuration utility Invalid parameter blocks in BIOS flash
device. Enter setup and use
advanced configuration
option to reset configuration
data (due to corrupted ESCD
data).
Table 6-33 Example BIOS Messages (continued)
Message Explanation Corrective Action