Artesyn PrAMC-7311 Installation and Use (June 2014) User Manual
Page 39
Hardware Preparation and Installation
PrAMC-7311 Installation and Use (6806800P34D)
39
4. Wait for the blue LED to first perform short blinks, and then glow persistently.
5. Once the blue LED glows persistently, gently pull the AMC module handle outward
to disconnect the module from the AMC connectors. Continue to gently slide the
module outward along the guide rails.
6. Install AMC filler panel.
Data Loss
Removing the blade with the blue LED still blinking causes data loss.
Wait until the blue LED is permanently illuminated, before removing the blade.
Poor Shelf Cooling and EMC Compliance Violation
An empty AMC bay may result in poor shelf cooling and strong EMC radiation and thus lead to
EMC compliance violation.
Therefore, always cover empty or unused AMC bays with a filler panel.