Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 34)

Hardware Preparation and Installation
PrAMC-7311 Installation and Use (6806800P34D) 34
3. Remove the desiccant bag shipped together with the module and dispose of it
according to your country’s legislation.
2.3 Environmental and Power Requirements
The following environmental and power requirements are applicable to the blade.
2.3.1 Environmental Requirements
You must make sure that the blade, when operated in your particular system configuration,
meets the environmental requirements specified below.
The blade is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, please contact our customer's service immediately.
Operating temperatures refer to the temperature of the air circulating around the blade and not
to the component temperature.
Blade Damage
High humidity and condensation on the blade surface causes short circuits.
Do not operate the blade outside the specified environmental limits. Make sure the blade is
completely dry and there is no moisture on any surface before applying power.