Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 112)

Basic Input Output System
PrAMC-7311 Installation and Use (6806800P34D) 112
To save your changes and exit the BIOS, follow these steps.
1. Select [Exit Saving Changes].
The Save Setup Configuration Changes dialog box is displayed.
2. Select [YES] to save configuration changes and exit BIOS setup.
Select [NO] to return to the Exit menu without saving changes.
Figure 6-35 Exit Menu
Table 6-32 Exit Menu
Section Description
Exit Saving Changes Exit by saving changes
Exit Discarding Changes Exit by Discarding the BIOS changes
Load Setup defaults Load Setup default parameters
Discard Changes Discard the changes done