Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 89)

Basic Input Output System
PrAMC-7311 Installation and Use (6806800P34D) 89
The following table provides options in the South Bridge Configuration menu and their
defaults. Values contained in brackets [...] show the default setting.
Table 6-17 South Bridge Configuration
Feature Options Description
SMBUS Device Allows to configure SMBUS device.
Port 80h Cycles
PCI Clock Run Logic Allows to control PCIe clock gate power saving
feature.
HPET Support
HPET Memory Map BAR
Enable CRID
DeepSx Mode
State After G3 Specifies the state to switch to, when power is re-
applied after a power failure (G3 state).
Native PCI Express
SB PCI Express Config
SB USB Config
SB Azalia Config
SB Serial IRQ Config