Artesyn PrAMC-7311 Installation and Use (June 2014) - Manual (Page 63)

Basic Input Output System
PrAMC-7311 Installation and Use (6806800P34D) 63
BIOS does not support the translation if TeraTerm emulation is used. For putty emulation, you
should set the putty session as SCO if the BIOS setting is ANSI. If the putty session is used as
VT100+, then the BIOS setting should be VT100. TeraTerm does not work with the F2 key.
6.3 Configuration Settings
When the system is turned on or rebooted, the presence and functionality of the system
components is tested by POST (Power-On Self Test).
Product Damage or Loss of Regulatory Compliance
The serial port is meant for development/debug/craft purpose only.
The serial cable is not meant to be connected during normal field operation. The PrAMC-7311
has not been qualified for regulatory compliance with the serial cable connected.