Datalogic Scanning 9500 - Manual (Page 358)

6-242
Magellan ® 9500
Codabar Length Control
This feature specifies whether variable-length or fixed-length decoding
will be set for Codabar.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR LENGTH CONTROL = VARIABLE-LENGTH
CODABAR LENGTH CONTROL = FIXED-LENGTH
NOTE
If variable-length control was selected, you must now set the features Coda-
bar Maximum Label Length and Codabar Minimum Label Length. If fixed-
length control was selected, you must now set
Codabar Fixed Length 1 and
Codabar Fixed Length 2.