Rs-232 software flow control, Rs-232 software flow control -90 – Datalogic Scanning 9500 User Manual

Page 206

Advertising
background image

6-90

Magellan

®

9500

RS-232 Software Flow Control

Enables/disables RS-232 Flow Control using XON/ XOFF characters. .

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

RS-232 SOFTWARE FLOW CONTROL = DISABLE

RS-232 SOFTWARE FLOW CONTROL = ENABLE

NOTE

This item will be ignored when the feature,

RS-232 NAK Character, is

enabled

Advertising
This manual is related to the following products: