Datalogic Scanning 9500 - Manual (Page 263)

EAN-13 Enable
Product Reference Guide
6-147
Bookland AIM ID
This feature enables/disables transmission of the Bookland AIM symbol-
ogy identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
BOOKLAND AIM ID = DISABLE
BOOKLAND AIM ID = ENABLE