Datalogic Scanning 9500 - Manual (Page 299)

RSS Expanded Enable
Product Reference Guide
6-183
RSS Expanded 2D Component Enable
When this feature is enabled, and the software reads an RSS Expanded bar
code that has a 2D component associated with it, the RSS Expanded bar
code will not be reported to the terminal.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RSS EXPANDED 2D COMPONENT = DISABLE
RSS EXPANDED 2D COMPONENT = ENABLE