Odu:) enable ( config ( transmitter (frequency, Odu:) enable ( config ( transmitter ( output, Odu:) enable ( config ( transmitter ( hpa – Comtech EF Data CDM-550T User Manual

Page 156

Advertising
background image

CDM-550T Satellite Modem

Revision 3

KST-2000A FSK Remote Operation

MN/CDM550T.IOM

(ODU:) ENABLE

Æ CONFIG Æ TRANSMITTER ÆFREQUENCY

EDIT ODU TX FREQUENCY:

14500.0 MHz (PRESS ENT)


Edit the transmit frequency by selecting the digit to be edited, using the [

←] [→] keys.

The value of the digit is then changed using the [

↑] [↓] keys. The user may then press

<ENTER>.

The frequency limits of the KST-2000A are known and the frequency values are
constrained accordingly.

(ODU:)

ENABLE

Æ CONFIG Æ TRANSMITTER Æ ATTEN (Attenuation)

EDIT ODU TX ATTENUATION:

15.00 dB (PRESS ENTER)


Edit the transmit attenuation by selecting the digit to be edited, using the [

←] [→] keys.

The value of the digit is then changed using the [

↑] [↓] keys. The user then presses

<ENTER>.

(ODU:)

ENABLE

Æ CONFIG Æ TRANSMITTER Æ OUTPUT

SELECT KST TX OUTPUT:

OFF ON WARM (ENTER)


Select ON, OFF, or WARM using the [

←] [→] keys, then press <ENTER>.

• WARM is OFF, if COLD.
• WARM is ON, if warm and NO FAULTS
• FAULTS present, stays WARM and OFF indefinitely

(ODU:)

ENABLE

Æ CONFIG Æ TRANSMITTER Æ HPA

CONFIG HPA: STATE

FAULT-LOGIC (ENTER)

D–4

Advertising