Comtech EF Data CDM-550T - Manual (Page 72)

CDM-550T Satellite Modem Revision 3
Front Panel Operation MN/CDM550T.IOM
If the selected location does not contain a previously stored configuration, the following screen is
displayed:
Pressing ENTER or CLEAR will take the user back to the previous menu.
If, however, the selected location contains a previously stored configuration, the
following screen is displayed:
Select NO or YES using the [
←] [→] arrow keys, then press ENTER.
Selecting YES will overwrite the existing configuration at the selected location.
Selecting LOAD will display the following screen:
YOUR CONFIGURATION HAS
BEEN STORED! (ENTER)
WARNING! LOC 10 CONTAINS DATA!
OVERWRITE? NO YES
6.2.7.2 (STORE/LD) LOAD
Select the location to load a configuration from, using the UP/DOWN arrow keys, then press
ENTER. Locations 1 through 10 are available.
If the selected location contains valid data, the following screen will be displayed:
Pressing ENTER or CLEAR will take the user back to the previous menu.
LOAD CONFIGURATION FROM
LOCATION: 10 (ENTER)
THE NEW CONFIGURATION
HAS BEEN LOADED (ENTER)
6–36